1. No light
A. The battery is dead: please use the matching charger to charge the battery (do not use it when charging). One charge takes about 3 hours, the battery light is on when charging, and the light is off when charging is complete. The charging time should not exceed 4 hours, otherwise, the battery will be easily damaged.
B. The battery is in the protection state: when the battery is continuously vaped for more than 18 times or used for a long time (more than 8~10 seconds), the battery will be in the protection state, and it can be used normally after a while.
If your vape isn’t working after a refill and there is no smoke,, there are two common problems. First of all, the battery may need to be charged and turned on. Depending on the style of device you are using, you may need to press the firing button five times consecutively to turn the device on.
If you have turned the device on, check for an orange or red light indicating that the battery is low. If so, place it on the charger or replace the old batteries with a fresh set.
Next, the firing pin may be keeping you from getting a solid electrical current to your coils. If you remove your clearomizer from the top of your device, look inside the connector on the device to see the firing pin in the center.
This pin is designed to move up and down to connect with your clearomizer. If it has been pushed too far down into the connector, it may not be making a connection. Use a tiny screwdriver to gently wiggle it loose until it springs back up.
Wanna buy the vape and tobacco-free items with free shipping, click the button below or https://vapecigshop.com/Buy Vape and Tobacco-Free Items
2. The LED light blink
This is a program setting. The vape adopts a user-friendly design. When it is used continuously for more than 15~18 puffs (about the number of puffs of a cigarette), or when it is used for more than 8~10 seconds in one puff, the indicator light will flash, and the battery stops working. This is a protection mechanism, which may cause choking if the smoke is too big, and it is also a protection for the power supply to prevent the power from being too high.
If your vape pen or dab pen blinks 10 times, this means that something is wrong with your device. Read on to diagnose the exact cause, as these are the four most common culprits.
Reason #1: Battery is Dying
Most often, a device blinking ten times is trying to tell you that the battery is too low to vape properly. We know that when the Yocan Evolve Plus XL is blinking 10 times, the device needs to be charged. Similarly, when the G Pen flashes 10 times, the battery is basically dead. The easy solution to this problem is simply recharging your battery.
Reason #2: Over-Extended Hits
Some devices will blink ten times if you took too long of a pull off of your device. Devices are designed to automatically shut off when you’re taking too big of a hit. If this happens, try taking a smaller hit next time.
Reason #3: Voltage Level is Too Low
Sometimes, a pen blinking ten times can mean that the voltage level is too low despite the battery being properly charged. In this case, you need to look at the battery connections of your device. Most often, this happens because the connections are either dirty or not lining up exactly with the battery. Make the necessary adjustments to continue vaping.
Reason #4: You Need a New Device
Another reason that’s a bit more serious is that your device is simply dead. Even the most high-quality vape pens are not built to last forever, and sometimes, those ten blinks can be flashes of death. For example, users report that when the Pax 2 is flashing blue ten times, this usually means it needs to be replaced entirely. Similarly, many find that the Evolve Plus battery won’t charge once it’s begun to blink ten times, meaning that a new device is needed to take its place.
Don’t Ignore That Blinking Light
If your cartridge battery pen is blinking, it means that there is something dysfunctional within your vaping setup. The good news is that this is a fairly common error message that’s easy to diagnose and fix. Use the guide above to find out the most common reasons behind a pen that blinks 10 times.