Model No: Hitaste P6
Size:105*29.5*21.5mm
net weight: 80g
Output Voltage:3000mAh
Screen: OLED screen
Warm-up Time: 15 seconds
Heating Type: Pin style
Charging Time: 3 hours
One full charging: Support 35pcs tobacco sticks
Color: Black,red,white,blue,multicolor
The cylindrical structure contribute to the heating rod stronger and eco-friendly,keep original taste when heating
It comes with USB port via which it can be fully charged 3 hrs charge ,during charging,the battery indicator is flashing to prompt charging(Smoking is not supported during charing)
Press the power button 3 times within 2 seconds to power on, the device vibrates once to preheat,the preheating is completed after another vibration, then ready for smoking
Press the power button 3 times rapidly, the device vibrates once with automatic shutdown and displays over
HD display screen indicates battery level, temperature,smoking count, and smoking time at a glance
P6 Quick Operation Manual:
Fire and heat: quickly press the fire power button 3 times to fire;
When the body vibrates and the temperature on the display starts to rise at the same time, the warm-up starts, and when the temperature reaches the set temperature, there will be a vibration reminder;
Power off: press the ignition switch 3 times to power off at any time;
In the standby state or in use state, you can press the temperature +/- key to adjust the temperature;
Adjusting time: In the standby state, quickly press the power botton 5 times to enter the adjusting time mode;
Press +/- key to increase or decrease each use time;
After setting the time, press the power button again to leave the timing mode;
Counter reset: in the standby state, quickly press the power button 5 times to enter the time adjustment mode; then immediately press the power button 5 times to enter the counter reset mode;
Then press the + or-button, or turn on the powre button to reset the counter;
The last 15 seconds: there will be a vibration prompt on the body;
After use, gently rotate the heatstick and pull up the magnetic cover to take out the heatstick;
Note: The heating needle-type heating hood can be separated from the heating rod by the method of rotating the heatstick, but this method is not suitable for the heating piece-type heating hood;
Can use ordinary MicroUSB charger for charging;
P6 FAQ
The warm-up time will be slightly different due to the different set temperature;
During the heating process, the display will show the current temperature in real time;
Fully charged can use 29 sticks; (@260°C @4 and a half minutes including preheating);
If the long time is adjusted to 6 minutes, 24 sticks can be used when fully charged; (@260°C);
When charging, the battery display will slide; when fully charged, it will display the full battery;
The charging time (from no power to full power) is about 3 hours;
Daily cleaning: Ideally, wipe off the smoke oil in the base with a paper towel after each use;
High temperature cleaning: When fully charged, quickly press the power button 8 times to enter the high temperature cleaning mode. The high temperature cleaning lasts about 20 seconds;
Note: Before cleaning at high temperature, remove the plastic cover first;
After cleaning at high temperature, wait until the temperature drops before using it again;
High-temperature cleaning has two safety protections: if the battery is insufficient, or just finished using, or just finished high-temperature cleaning, and the temperature has not yet dropped, it is not allowed to start the high-temperature cleaning mode; the display will show “TOO HOT” prompt;
As the body adopts a plastic shell, try to avoid immediate continuous use;
This device does not have the function of shutting down or locking, that is, it is in the standby state for a long time, as long as you press any key, the screen will light up immediately;
If you find that the heatstick is difficult to insert, please do not insert it forcibly to avoid breaking the heating rod;
You can insert a part of the heatstick, heat it up first, and then slowly insert the remaining part;
Or try to loosen the heatstick and insert it again;
1 X P6
1 X USB cable
1 X User Manual
It doesn’t come with a heat stick. You need to buy it separately.
Please check the guarantee policy.


Please contact us first before you leave a review, we will help you to deal with your problem In time
Reviews
There are no reviews yet.