Net weight: 98g
Battery capacity: built-in 3200mah
Charging time: 2 hour
Warm-up time: 15 seconds
Smoke Time: 180-360 seconds
One full charging: Support 26 tobacco cartridge
Battery Type: Li-On 3200 mAh
How to auto-clean
There are 2 ways to start cleaning function
First，press the power button 8 times continuously in the standby mode，the device will start to automatically clean with 1 vibration，displaying clean….5 seconds later and starting the timer，the surface of the heating rod is automatically being cleanded，and the device vibrates once again when the automatic cleaning is completed.
The second ，after every 5 tobacco sticks are smoked，the system automatically jumps out if the device needs to be cleaned. At the same time, it vibrated 5 times，int meanwhile，press plus/minus button to switch Y and N，selects Y to display, please remove the tobacco heatstick.After confirming the removal of tobacco heatsticks，press the power button to confirm，enter the cleaning state, select N or no operation for 15 seconds and then return to the device. Pay attention to removing the tobacco heatstick before cleaning。
Once your Hitaste P8 device has finished charging, you can begin using it. Here’s how;
Set preferences: Temperature adjustment: click + or – buttons until the desired temp shows on the screen, wait to set
Length of cycle: click the control button 5 times, length of cycle flashes, click + or – buttons to reach the desired time, wait to set
How to insert HeatStick
Click the control button 3 times to turn on
Heating time depends on the set temperature
The device will vibrate and numbers on the display screen will start changing once the heating process starts
The temperature will set once ready to use, but there is no vibration
The device will give a warning vibration near the end of the cycle and a countdown will show on the screen
How to remove HeatStick
Another feature of HiTaste P8 is the usage record. Here’s how to use it;
To clear the usage record: click the control button 5 times, length of cycle numbers flash, click the control button 5 more times, usage record lashes, click any button to clear.
To keep the device working well make sure you clean it regularly. The device actually helps you with this as it prompts you to automatically clean every 5 HeatSticks. The prompt will show on screen and you can click either ‘Y’ for ‘YES’ or ‘N’ for ‘NO.’
You can clean any time you want through the automatic cleaning feature. To use it, click the control button 8 times. The word ‘CLEAN’ will show on the screen once automatic cleaning has begun. Automatic cleaning takes 25 seconds.
You’ll also want to manually clean the device every so often. To do so, just remove the cap and insert the cleaning brush or cleaning sticks into the heating chamber and sweep away any grime.
1 X USB cable
1 X User Manual
It doesn’t come with a heat stick. You need to buy it separately.
Please check the guarantee policy.
Please contact us first before you leave a review, we will help you to deal with your problem In time